hallicrafters
HT-32B AM, CW and SSB Transmitter. 80, 40,
20, 15 and 10 Meters. 144 Watts PEP (2 x 6146's). Front panel controls:
Operation-power on/off, standby, Mox., Cal., Vox.,-PTT. Audio level 0-10,
R.F. level 0-10, Final tuning 80, 40, 20, 15, 10 meters. Function-LSB,
USB, DSB, CW., Driver tuning 0-5, Band selector 80, 40, 20, 15, 10. Gear
driven VFO. Microphone, Key and Headphone monitor jacks. 20"W x 10
1/2" H x 17"D,. 86lbs.
hallicrafters
SX-115 AM, CW, SSB Receiver.
Frequency coverage - Nine 500 KHz segments covering 3.5-4.0
MHz, 7.0-7.5 MHz, 14.0-14.5 MHz, 21-21.5 MHz, 28-30 MHz (4 segments) and
WWV. Crystal controlled first and third oscillators. Selectivity variable
in 5 steps from 500Hz to 5000Hz, product detector for SSB/CW and envelope
detector for AM. IF noise limiter. Gear driven VFO. 1uV sensitivity on
AM, 1/2uV on CW/SSB. Front panel controls: R.F. gain, A.F. gain, tuning,
selectivity, function (USB/LSB/AM/Power), cal set and lock, receive/standby
switch, AVC/ANL, antenna trimmer, band switch, calibrator on/off, headphone
jack. 16"W x 10 1/2" H x 16"D, 47lbs.
hallicrafters
HT-33B Amplifier. Legal limit, 80M 40M
20M, 15M, 10M coverage. Uses a pair of PL-172 high efficiency pentodes.
Front panel contols: Meter selector, filiment switch, high voltage switch,
bias adjustment, band switch, plate tuning and load tuning. Pi-network
output matches 40 to 80 ohms. 20"W x 10 1/2" H x 17" D,
130lbs.
hallicrafters
SX-101A Receiver. Covers 80, 40, 20, 15,
10, 6, 2 meters and WWV. 40:1 gear driven VFO, 100KHz xtal marker, 5 step
selectivity crystal filer from 500 Hz to 5000 Hz. Noise limiter, one uV
sensitivity or better, Front panel controls: Main tuning, pointer preset,
antenna trimmer, tee-notch frequency, tee-notch depth, sensitivity, band
selector, volume, selectiviey, BFO response (USB/LSB/CW) , AVC on/off,
AVC fast/slow, ANL, Cal, Receive/standby switch. 20"W x 10 1/2"
H x 16"D, 74lbs.
hallicrafters
SX-120/SW-500 Receiver.General coverage
540KHz-31MHz, electrical bandspread, slide rule dial with imprinted guide
to foreign, government, aviation, etc. Built in ferrite loop of AM broadcast
and 45" whip for SW. Terminals for longwire or dublet antenna. Front
panel contols: Main tuning, Bandspread tuning, Band switch, Audio volume,
AC power, BFO/Sensitivity. 13 1/2" W x 5 7/8" H x 8 3/4"
D, 11 3/4 lbs.
hallicrafters SX-100 Receiver.General coverage 540KHz-34MHz in 4 bands. Bandspread dial is calibrated for 80, 40, 20, 15, and 10 Meter bands. AM/CW/SSB. Selectable Side Band operation with tee-notch filter. 100KHz crystal calibrator. Front panel controls: Pitch, reception, stand-by, phone jack, response (USB/LSB), antenna trimmer, notch depth, calibrator on/off, sensitivity, band select, volume, tuning, AVC on/off, noise limiter on/off, band spread, selectivity. 18 3/4" W x 8 1/2" W x 10 5/8" D, 42lbs.
hallicrafters SX-110 Receiver. General coverage 540KHz-34MHz in 4 bands. Slide rule bandspread dial calibrated for 80, 40, 20, 15, 11, and 10 meter bands. Crystal filter, antenna trimmer, S meter. Has one RF stage and 2 IF stages. 18 3/4"W x 8" H x 10 1/4" D, 32lbs. SX-108 same as above without S meter, antenna trimmer and crystal filter.
hallicrafters HA-5 VFO. Heterodyne VFO for 80-2 meters. Illluminated dial, spotting switch, crystal controlled band switch. Output range 3.5-4.0, 7.0-7.5, 8.0-8.222 and 8.333 to 8.833 MHz. 6U8 crystal osc, 6BA7 mixer, 6AQ5 output. 7"W x 5"H x 8 1/2"D, 8lbs.